| Profile: | SR-Profiles 160x60x6mm | Laser Welded RHS 160x60x6x10mm |
| Execution: | MAG-welded | Laser welded |
| Steel grade: | S235JR | Stainless or Steel |
| Weld penetration: | 6mm | min. 5mm |
| Weld seam radius: | Ground flush | Ground flush |
| External radii: | 0.5÷1.0mm | <0.5mm |
| Rectilinearity: | ≤ 1.3 mm/m | ≤ 1 mm/m |
| Twist: | ≤ 2mm+ 0.5 mm/m | ≤ 0.65 mm/m |
| Surface Finish: | Sa3 (ISO 8501-1) | Grit shot blasted |
Profile:
Execution:
Steel grade:
Weld penetration:
Weld seam radius:
External radii:
Rectilinearity:
Twist:
Surface Finish:
SR-Profiles 160x60x6mm
MAG-welded
S235JR
6mm
Ground flush
0.5÷1.0mm
≤ 1.3 mm/m
≤ 2mm+ 0.5 mm/m
Sa3 (ISO 8501-1)
RHS 160x60x6x10mm
Laser welded
Stainless or Steel
min. 5mm
Ground flush
<0.5mm
≤ 1 mm/m
≤ 0.65 mm/m
Grit shot blasted
About the profile
There are several important advantages for the SR-Profiles compared to laser welded sharp corner tubes:
- They are available from stock and can be shipped within a couple of days.
- Competitive price.
- They are sharp corners with a corner radius up to max. 1mm.
- There is no need for complex structural calculation, the table indicates what is available.
- Standard length of 10m (except the 60x60x6mm size that has a maximum length of 8m)
- Shorter length can be reused on other projects.
- Does the project allow for long lead times, we can supply “customised” SR-Profiles with optimised dimensions and lengths. The minimum quantity is of 25t per size.
Montanstahl is carrying a significant amount of stock of SR-Profiles, available for immediate shipment. They are the ideal solution for quick and easy steel-glass façades at a competitive rate. They come with a clean grit shot blasted surface, free from rust (Sa3 according to ISO 8501-1) and ready for further processing like coating or painting. SR-Profiles can also be combined with our special laser welded sharp corner tubes within an almost seamless combination.
V-Markt-facade-front
V-Markt Facade
V-Markt-facade
V-Markt Facade
V-Markt-facade-lateral
V-Markt Facade
